Phone:+86 18806715434

Service Time:China:9:00 - 18:00

China Time Zone(GMT+8)(Update in 5 mins)

Cart ()
  • Standard PCB
Size :
Input the maximum width and height of the board. If the dimensions differ , file shall take precedence over the inputed dimensions
x mm
inch'←→mm
Must see before order
Quantity :
Input the order quantity.
Material :
FR-4 is epoxy glass fiber material, which widely used in the production of PCBs,
Layers :
The number of conductive layers.
PCB Stackup PCB Stackup PCB Stackup
CEM-1-TG :
Number of Designs :
How many different design of PCBs in the panel?
Board Type :
Board type is the method in which you want to deliver your PCB, irregular shape, round board, small batch orders, or sizes less than 100mm*100mm, no matter soldered by hand or machine, we suggest to deliver in panel,which can improve SMT efficiency and reduce the production cost.
X-out Allowance in Panel :
Bad PCBs existed in panel, If you do not accept the X-out Allowance in Panel, the cost will increase 30%
Panel Way :
The array of PCB in panel
x *Order: Vertical X Horizontal
Route Process :
Break-away Rail:
mm
Panel Info

Panel Info

Panel Size
Panel Quantity
Panel Area

Set View (FYI)

Routing width
Y level:mmX levelmm
Thickness :
Our company uses Kingboard A class military industy material,tolerance is relatively small, the normal delivery of the finished board thickness is about 10%; mainly caused by sinking copper, electroplating, printing, silkscreen, surface treatment;If there are other requirements for thickness tolerance, please note in other requirements, otherwise it will be regarded as normal board thickness tolerance.
* Unit: mm
Finished Copper :
Electroplating copper is the most basic conductive layer of the PCBs and our company adopts enough copper thickness according to the customer's requirements to meet the customer's conductive functional requirements.1oz=35um, 2oz=70um.
Inner Copper :
The thickness and width of copper in PCB are mainly designed according to electric current. When the average current of the signal is large, consideration should be given to the current that can be carried by the width constraint, the cooper thickness of PCB layout and relations between width constraint and current. 0.5oz=17.5um,1oz=35um
Min Track/Spacing :
Min Hole Size :
Solder Mask :
the color of the soldermask,some special color need extra fee
  • sale
Silk Screen :
the color of the text printed,silk screen and solder resist can not be the same color.
Surface Finish :
Extra process to exposed copper to help solderability.
Au/Ni Thickness :
Au/Ni Thickness :
Via Process :
If you submit gerber file,we will process via according to your file. If you submit PCB and PCBDOC files,we will process via according to the options.If PCB hole ≥0.45mm,plug oil by default will not full

*For Gerber files, this choice is useless.It will be made according to files as default.

Test Method :
Select the random test, will allow a certain percentage of defective products, please choose carefully.
Gold Fingers :
the bevelling is 45,only when ENIG surface finish is chosen,the fingers will be gold-plated.
*Beveled Degree 45°
BGA :
*BGA the smallest PAD is 0.25mm
Impedance Control :
Impedance tolerance: ±10%
*Multiple choice
Impedance Report :
Delivery Requirement:
  • Neutral Carton Box
  • Remove Production Number
  • Paper Sheet between PCBs
  • Humidity Card
Special Technology:
  • Edge plating
  • Two-color solder mask
  • Press-fit holes
  • Counterbore
  • Rectangle slot
Copper of Hole:
Extra process to exposed copper to help solderability.
UL Mark:
After selection, the UL mark is added to the random blank space by default.
Production Number:
1. PCBBUY number A unique number for the order of PCBBUY will be added to the random blank space. 2. Without number Extra charge for it and number will not be added on PCB. System will automatically select and confirm the production file. 3. System will automatically select and confirm the production file for production number on certain location. The character "PCBPUYPCBPUY" must be added in the same position of the PCB file. The line width is 5mil and the character height is not less than 0.8mm. If the specified number needs to be added to the margin, please note: Add product number is to the margin.

*This item is invalid if no location is specified or no PCBBUY character is added.

Add/Update the Date:
Remark :
PCB Specifications
Size Quantity
Layers Thickness
Solder Mask Font Color
Via Process

Surface Finish

Test Method

Finished Copper

Board Type

Area

Pricing and Build Time
  • Delivery Time
  • Build Time
  • PCB Cost
  • Shipping Cost
  • Total

Shipping The weight here is for reference only; the shipping cost might be adjusted according to the actual weight of the final product.

{{this.CountryNameShow}}

  • {{item.Name}}

CHN Time Zone(GMT+8): 09/20/2021 23:11:09

Method
Cost
Estimation
Save to Cart

*Tips:We recommend you DHL, since the products may not be received using other express delivery. If the products cannot be received by non-DHL express, we will not bear the loss.